SOFTWARE UPDATES
NanoRanger® Software Releases
Keep your NanoRanger® updated with the latest software!
NanoRanger® Software Release V2.17 - 2 April 2022
Software Release V2.17 is now available.
Release V2.17 is a minor update which addresses an issue whereby the SCPI was occasionally seen to freeze when using the *IDN? Command.
CAUTION!
Updating your NanoRanger® involves several sequenced steps, which if not performed correctly, can render your NanoRanger® inoperative. In that event, you would need to return your NanoRanger® to AltoNovus for reactivation.
We therefore recommend that you read and follow the Instructions closely. Begin only when you are satisfied that you understand all of the steps required and you have the time available to complete the process (approximately 1 hour).
If unsure about any part of the process, email 'support@altonovus.com' before you begin. We'd also love to hear from you with any feedback on how you found the update process.
First, download the Software Update Instructions below. Read carefully before proceeding!
Software Update Instructions V1.0
The software files from AltoNovus that you will need are:
- NanoRanger_Bootloader_Files.zip AND
- LPM_6_217.zip
These are available for download at the two buttons below:
NanoRanger_Bootloader_Files.zip LPM_6_217.zip
NanoRanger® Software Release V2.16 - 16 November 2021
Software Release V2.16 is now available.
Release V2.16 addresses an issue that could occur with unintended range oscillation in the event of high frequency, very narrow current pulses.
We therefore recommend that you read and follow the Instructions closely.
First, download the Software Update Instructions below. Read carefully before proceeding!
The software files from AltoNovus that you will need are:
- NanoRanger_Bootloader_Files.zip AND
- LPM_6_216.zip
These are available for download at the two buttons below:
NanoRanger_Bootloader_Files.zip LPM_6_216.zip
NanoRanger® Software Release V2.15 - 27 September 2021
Software Release V2.15 is now available.
Release V2.15 delays the start of export of readings via the USB until NanoRanger® has 'settled' after power-on. Release V2.15 also addresses a range selection issue that could occur under very specific circumstances on the main display line.
We therefore recommend that you read and follow the Instructions closely.
First, download the Software Update Instructions below. Read carefully before proceeding!
The software files from AltoNovus that you will need are:
- NanoRanger_Bootloader_Files.zip AND
- LPM_6_215.zip
These are available for download at the two buttons below:
NanoRanger_Bootloader_Files.zip LPM_6_215.zip
NanoRanger® Software Release V2.10 - 8 June 2021
Software Release V2.10 is now available.
Release V2.10 introduces a Fast Sample Mode to NanoRanger®, allowing the User to take 150 Readings per second, in order to investigate current profiles over short periods of time.
We therefore recommend that you read and follow the Instructions closely.
First, download the Software Update Instructions below. Read carefully before proceeding!
The software files from AltoNovus that you will need are:
- NanoRanger_Bootloader_Files.zip AND
- LPM_6_210.zip
These are available for download at the two buttons below:
NanoRanger_Bootloader_Files.zip LPM_6_210.zip
NanoRanger® Software Release V2.01 - 20 February 2021
Software Release V2.01 is now available.
Release V2.01 allows the measurement of Average current to be made while NanoRanger® is Auto-Ranging.
We therefore recommend that you read and follow the Instructions closely.
First, download the Software Update Instructions below. Read carefully before proceeding!
The software files from AltoNovus that you will need are:
- NanoRanger_Bootloader_Files.zip AND
- LPM_6_201.zip
These are available for download at the two buttons below:
NanoRanger_Bootloader_Files.zip LPM_6_201.zip
NanoRanger® Software Release V1.14 - 30 November 2020
Software Release V1.14 is now available.
Release V1.14 rectifies an issue that can manifest during some Measure Average operations, where Charge may not be calculated correctly.
CAUTION!
Updating your NanoRanger involves several sequenced steps, which if not performed correctly, can render your NanoRanger inoperative. In that event, you would need to return your NanoRanger to AltoNovus for reactivation.
We therefore recommend that you read and follow the Instructions closely.
First, download the Software Update Instructions below. Read carefully before proceeding!
Software Update Instructions V1.0
The software files from AltoNovus that you will need are:
- NanoRanger_Bootloader_Files.zip AND
- LPM_6_114.zip
These are available for download at the two buttons below: